AR-15, AR-10, all makes, standard small and large pin Colt, stock single stage - Pull will be a, very short, smooth, clean break. 2.5 and 3# come standard with the speed hammer, 4# is $5 extra. The speed hammer modification is removing the hammer tail which has a faster lock time and more positive hard primer ignition. New stock AR trigger spring kit available for $4.50 per set if needed. Please let me know if this is for a DPMS, Mega or Remington .308, these need a slightly different technique than standard AR-15's. 4lbs pull runs $45, 3lbs runs $55, 2.5lbs is $65. uses a new JP match spring set installed. 2.5 & 3# have the hammer tail removed ("speed hammer") included in the price. On Armalite/Eagle AR-10's .308, the 2.5lbs trigger may have light primer strikes on military surplus ammo because of the spring loaded firing pin, AR-15's firing pins are free float and have reduced chance of this issue. DPMS, Megam CMMG .308's have a free float firing pin as well. **Aftermarket match 2 stage trigger group services. reduce the pull to 3 or 4#, your choice. $55. **POF trigger pack modules, these have a factory crisp break at 6lbs, I can bring this down to about 3.5lbs. $55. The trigger, hammer, disconnecter and their associated springs are all needed! If you aren't sure what to send, please email me or click here. I recommend the 4lbs pull for duty and field rifles, 3lbs works perfectly for long range and target style shooting. Any questions, or to order, please EMAIL me.
AR-15, AR-10, all makes, standard small and large pin Colt, stock single stage - Pull will be a, very short, smooth, clean break. 2.5 and 3# come standard with the speed hammer, 4# is $5 extra. The speed hammer modification is removing the hammer tail which has a faster lock time and more positive hard primer ignition. New stock AR trigger spring kit available for $4.50 per set if needed. Please let me know if this is for a DPMS, Mega or Remington .308, these need a slightly different technique than standard AR-15's. 4lbs pull runs $45, 3lbs runs $55, 2.5lbs is $65. uses a new JP match spring set installed. 2.5 & 3# have the hammer tail removed ("speed hammer") included in the price. On Armalite/Eagle AR-10's .308, the 2.5lbs trigger may have light primer strikes on military surplus ammo because of the spring loaded firing pin, AR-15's firing pins are free float and have reduced chance of this issue. DPMS, Megam CMMG .308's have a free float firing pin as well. **Aftermarket match 2 stage trigger group services. reduce the pull to 3 or 4#, your choice. $55. **POF trigger pack modules, these have a factory crisp break at 6lbs, I can bring this down to about 3.5lbs. $55. The trigger, hammer, disconnecter and their associated springs are all needed! If you aren't sure what to send, please email me or click here. I recommend the 4lbs pull for duty and field rifles, 3lbs works perfectly for long range and target style shooting. Any questions, or to order, please EMAIL me.