**USP, HK45, P2000, P30 full sized or compact all calibers, reduce single action weight 1 to 2#, actual sear creep reduced up to 85% after slack take up. A new match 12# or 10# hammer spring is supplied and installed, I would consider the 10# hammer spring for range use only, please specify which spring you need. DA pull will drop 1-3#, depending on the model, variant and spring used. Pull weight will drop a bit more when received after 2-300 rounds for break in. Price is $85. Only the lower frame less the magazine is needed. ** Mark 23 .45acp same as above. $85. **VP9/40, pull weight reduced to the 3.5 or 4.5# range, your choice. For a 2-2.5# trigger pull add $45." Trigger creep is reduced 90%+ after the trigger slack take up, price is $59. The short reset trigger option reduces trigger travel up to 30% and over travel is reduced as well, add $39. Only the slide is needed for the trigger work, but the pistol less the magazine is needed for the short reset trigger and/or accuracy up grade, price runs $39 for the accuracy upgrade. Lobos trigger supplied and installed runs $129, black/black and black/red color combo's usually in stock. This unit provides a 30% reduction in trigger slack take up and reduction in over travel. The Lazy Wolf trigger is also available, inquire for price and availability. **USP, P2000 all variants. Extended magazine release (HK45c) release, I can supply and install one for $20, limited availability at times. **H&K USP compact, USP full sized spurred hammer supplied and installed, add $35. **Trigger reset reduction option. P-30, P-2000, HK45, USP, all versions. Reset is reduced up to 40%+, operational firing pin safety block remains. Work includes USP match trigger set screw installed; add $59, USP compact add $49. The USP compact cannot accept the set screw. **USP SA/DA (V1) converted to LEM competition style, this is the light LEM version. Major contact surfaces are polished for a nice smooth pull. Trigger pull for the "pre-cocked" position is in the low 4lbs area. Price runs $175. Subject to LEM kit availability. P-30 and P-2000 LEM conversions with trigger work runs $179. **H&K USP, HK-45, P-2000, P-30 Full Size and compacts accuracy upgrade. Maximize barrel lockup into the slide; shrink groups up to 20%. The pistol less magazine is needed. $39 with trigger work, $49 without. **P7 Series - Reduce creep up to 80% after trigger slack take up, pull weight reduced up to 20%. Only the slide is needed price runs $45. Upgrade Options Aftermarket triggers that will have adjustable overtravel and/or DA pre-travel. These can be flat faced, curved and flat faced skeletonized. Contact me for current prices, options and availability. Any questions, or to order, please EMAIL me.
**USP, HK45, P2000, P30 full sized or compact all calibers, reduce single action weight 1 to 2#, actual sear creep reduced up to 85% after slack take up. A new match 12# or 10# hammer spring is supplied and installed, I would consider the 10# hammer spring for range use only, please specify which spring you need. DA pull will drop 1-3#, depending on the model, variant and spring used. Pull weight will drop a bit more when received after 2-300 rounds for break in. Price is $85. Only the lower frame less the magazine is needed. ** Mark 23 .45acp same as above. $85. **VP9/40, pull weight reduced to the 3.5 or 4.5# range, your choice. For a 2-2.5# trigger pull add $45." Trigger creep is reduced 90%+ after the trigger slack take up, price is $59. The short reset trigger option reduces trigger travel up to 30% and over travel is reduced as well, add $39. Only the slide is needed for the trigger work, but the pistol less the magazine is needed for the short reset trigger and/or accuracy up grade, price runs $39 for the accuracy upgrade. Lobos trigger supplied and installed runs $129, black/black and black/red color combo's usually in stock. This unit provides a 30% reduction in trigger slack take up and reduction in over travel. The Lazy Wolf trigger is also available, inquire for price and availability. **USP, P2000 all variants. Extended magazine release (HK45c) release, I can supply and install one for $20, limited availability at times. **H&K USP compact, USP full sized spurred hammer supplied and installed, add $35. **Trigger reset reduction option. P-30, P-2000, HK45, USP, all versions. Reset is reduced up to 40%+, operational firing pin safety block remains. Work includes USP match trigger set screw installed; add $59, USP compact add $49. The USP compact cannot accept the set screw. **USP SA/DA (V1) converted to LEM competition style, this is the light LEM version. Major contact surfaces are polished for a nice smooth pull. Trigger pull for the "pre-cocked" position is in the low 4lbs area. Price runs $175. Subject to LEM kit availability. P-30 and P-2000 LEM conversions with trigger work runs $179. **H&K USP, HK-45, P-2000, P-30 Full Size and compacts accuracy upgrade. Maximize barrel lockup into the slide; shrink groups up to 20%. The pistol less magazine is needed. $39 with trigger work, $49 without. **P7 Series - Reduce creep up to 80% after trigger slack take up, pull weight reduced up to 20%. Only the slide is needed price runs $45. Upgrade Options Aftermarket triggers that will have adjustable overtravel and/or DA pre-travel. These can be flat faced, curved and flat faced skeletonized. Contact me for current prices, options and availability. Any questions, or to order, please EMAIL me.
**USP, HK45, P2000, P30 full sized or compact all calibers, reduce single action weight 1 to 2#, actual sear creep reduced up to 85% after slack take up. A new match 12# or 10# hammer spring is supplied and installed, I would consider the 10# hammer spring for range use only, please specify which spring you need. DA pull will drop 1-3#, depending on the model, variant and spring used. Pull weight will drop a bit more when received after 2-300 rounds for break in. Price is $85. Only the lower frame less the magazine is needed. ** Mark 23 .45acp same as above. $85. **VP9/40, pull weight reduced to the 3.5 or 4.5# range, your choice. For a 2-2.5# trigger pull add $45." Trigger creep is reduced 90%+ after the trigger slack take up, price is $59. The short reset trigger option reduces trigger travel up to 30% and over travel is reduced as well, add $39. Only the slide is needed for the trigger work, but the pistol less the magazine is needed for the short reset trigger and/or accuracy up grade, price runs $39 for the accuracy upgrade. Lobos trigger supplied and installed runs $129, black/black and black/red color combo's usually in stock. This unit provides a 30% reduction in trigger slack take up and reduction in over travel. The Lazy Wolf trigger is also available, inquire for price and availability. **USP, P2000 all variants. Extended magazine release (HK45c) release, I can supply and install one for $20, limited availability at times. **H&K USP compact, USP full sized spurred hammer supplied and installed, add $35. **Trigger reset reduction option. P-30, P-2000, HK45, USP, all versions. Reset is reduced up to 40%+, operational firing pin safety block remains. Work includes USP match trigger set screw installed; add $59, USP compact add $49. The USP compact cannot accept the set screw. **USP SA/DA (V1) converted to LEM competition style, this is the light LEM version. Major contact surfaces are polished for a nice smooth pull. Trigger pull for the "pre-cocked" position is in the low 4lbs area. Price runs $175. Subject to LEM kit availability. P-30 and P-2000 LEM conversions with trigger work runs $179. **H&K USP, HK-45, P-2000, P-30 Full Size and compacts accuracy upgrade. Maximize barrel lockup into the slide; shrink groups up to 20%. The pistol less magazine is needed. $39 with trigger work, $49 without. **P7 Series - Reduce creep up to 80% after trigger slack take up, pull weight reduced up to 20%. Only the slide is needed price runs $45. Upgrade Options Aftermarket triggers that will have adjustable overtravel and/or DA pre-travel. These can be flat faced, curved and flat faced skeletonized. Contact me for current prices, options and availability. Any questions, or to order, please EMAIL me.